Renishaw TS20 Guide D'installation Et D'utilisation page 17

TS20 PROBE with CRANKED STYLUS for applications where the straight stylus is not suitable
Non probing direction
39 mm (1.53 in)
34 mm
(1.34 in)
Uni-directional repeatability 2σ σ σ σ σ
At a probing speed of 480 mm/min (1.57 ft/min)
Note:
The characteristics of cranked styli do not
allow them to have as good a repeatability
performance as straight styli
2 µm
(0.00008 in)
TS20 SPECIFICATION
0,02 mm (0.0008 in)
A
in Z direction
0,03 mm (0.0012 in)
A
in X direction
A
Do not exceed the quoted overtravel distance for each
direction, otherwise the tool tip may slip off the stylus
edge, and could cause damage to the probe.
❃
A
Trigger force
(dependant on
sense direction)
0,6 - 1,6 N
60 - 160 gf
(2.12 - 5.64 ozf)
OVERTRAVEL
❃
B
C
❃
Direction
Overtravel
A
3,0 mm (0.12 in)
B
3.0 mm (0.12 in)
C 1,2 mm (0.05 in)
D
2,3 mm (0.09 in)
1-7
D