Troubleshooting; Disposal - VOLTCRAFT LX-1108 Mode D'emploi

Troubleshooting

In purchasing the Luxmeter you have acquired a product which has
been designed to the state of the art and is operationally reliable.
Problems and disturbances may, however, still arise.
For this reason, the following is a description of how you can elimi-
nate possible malfunctions yourself.
Always adhere to the safety instructions!
Fault
The measuring device
does not work.
No measuring value is
being displayed; only
dashes is visible.
No measured value
alteration.
Repairs other than those just described should only be
performed by an authorised electrician.

Disposal

If the device has reached the end of its operational life, please dis-
pose of accordingly.
Possible cause
Is the battery dead?
Check the charge condition of the
battery.
Incorrect measuring range?
Check the sensor (protective cap?!)
and change the area.
Is the HOLD function active?
29