Programming The Transmitter - Siemens SITRANS F FUG1010 IP65 NEMA 4X Instructions De Service

Connecting

3.4 Programming the Transmitter

3.4 Programming the Transmitter
Note
Before creating a site select a language and then English or Metric units from the Meter
Facilities menu.
Note
To select English or metric units: In [Meter Type] menu, scroll to [Meter Facilities] menu.
Press <Right Arrow> and select [Preferred Units]. Press <ENTER> to select. Press <Left
Arrow> and <Up Arrow> to return to main menu.
Select Meter Type
1. Press the <MENU> key and select the Meter Type.
2. Press the <Right Arrow> and scroll to [Dual Path Flow]
3. Press <ENTER> to select. The [Dual Path Flow] menu will appear.
Create a Site
1. At the [Chan/Path Setup] menu press the <Right Arrow>.
Note
Before proceeding make sure that English or metric units have been selected.
2. Press <Down Arrow> to select the [Create/Name Site] menu and enter a Site name.
3. Press <Right Arrow> to create Site name.
30
FUG1010 IP65 NEMA 4X Quick Start
Operating Instructions, 06/2014, A5E02951527-AC