Siemens SITRANS F FUG1010 IP65 NEMA 4X Instructions De Service page 39

5. The drop down menu lists the following sensor selections:
6. For this example, select the sensor model that appears on the sensor label then press
7. To select Sensor Size, press <Right Arrow>. Scroll to select the sensor size that matches
8. At [Sensor Mount Mode], press the <Right Arrow>. Scroll to select [Reflect] or [Direct]
9. IMPORTANT: Record Spacing Method and Number Index. This data will be used to
10.Sensors can now be mounted. Refer to Sensor Installation (Page 38) mounting
11.After sensors are mounted scroll to [Install Complete] and select [Install].
FUG1010 IP65 NEMA 4X Quick Start
Operating Instructions, 06/2014, A5E02951527-AC
– 1011 Universal
– 1011HP-T1 - Usable -40 to 120°C, recommended for Ø Temperature <40°C;
Standard.
– 1011HP-T2 - Usable -40 to 120°C, recommended for Ø Temperature >40°C - <80°C;
Named as high temperature.
– 1011HP-T3 - Usable -40 to 120°C, recommended for Ø Temperature >80°C <120°C;
special request.
<ENTER>.
①
Select based on type.
②
Select based on size.
③
After sensor is mounted select "Install."
the size indicated on the sensor label. Press <ENTER>.
mount and then press <ENTER>.
mount the sensors.
procedures (Reflect or Direct) and select the mounting mode desired.
Connecting
3.4 Programming the Transmitter
37