EUROM Cool Perfect 90WIFI Livret D'instructions page 16

OPERATION
Via the control panel on the air conditioner
Functions:
1. Power = ON/OFF button
Switch the unit on or off using this button.
2. Temp - = Temperature regulation down
During cooling: every time you press this button, the set temperature will decrease by one
degree to a minimum of 16°. During heating: every time you press this button, the set
temperature will decrease by one degree to a minimum of 16°.
3. Sleep = Sleep function
The sleep function will be selected if you press this button while using the cooling function. After
one hour, the set temperature will be increased by one degree; it will increase by a further
degree after a second hour. This setting will be maintained. During the sleep function, the fan
works on low speed.
Press this button during heating and the set temperature will be decreased by one degree after
an hour and by a further degree after a second hour. This setting will be maintained; the fan
works on a low speed.
The sleep function cannot be used during dehumidification.
4. Speed
Select fan speed with this button: low, medium or high. The corresponding light comes on.
Note: the speed button does not work during the dehumidifying process; the correct setting is
selected automatically (low).
5. Swing
When you press this button the slats on the outlet opening swing continuously to the left and
right. Pressing the button again switches the function off and the slats remain in their current
position.
6. Temp + = Temp. regulation up
During cooling: every time you press this button, the set temperature will increase by one
degree up to a maximum of 31°. During heating: every time you press this button, the set
16