HBM QuantumX Manuel D'emploi page 136

Safety instructions
20
DANGER
Risk related to poor isolation of external circuits:
Only devices and equipment complying with the require­
ments of the applicable standards (e.g. IEC 61010­2­030,
IEC 61010-031) may be connected.
DANGER
To avoid injury from coming into contact with danger­
ously active potential:
do not work on devices that are live; deactivate all dan­
gerous voltages before installing the measuring circuits.
do not wear jewelry (rings, watches, etc.), and do not
touch any live parts.
Comply with safety rules: isolate, secure, check, ground
and short-circuit, cover and safeguard.
A3757-2.2 HBM: public
MX809B