Safety Instructions; Warning Signs And Danger Symbols - HBM QuantumX Manuel D'emploi

2

Safety instructions

MX809B
This measurement module is built and tested in accor­
dance with IEC 61010, Safety Requirements for Electri­
cal Equipment for Measurement, Control and Laboratory
Use, and was in perfect condition when it left production.
To maintain this condition and ensure risk-free operation,
the user must comply with the instructions and warning
notices contained in this operating manual.
2.1

Warning signs and danger symbols

Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to
DANGER
This marking warns of an imminently threatening danger­
ous situation which - if safety requirements are disre­
garded - will result in death or serious physical injury.
Notice
This marking draws attention to a situation which - if dis­
regarded - can result in damage to property.
A3757-2.2 HBM: public
Safety instructions
property.
7