Safety Instructions; Warning Signs And Danger Symbols - HBM QuantumX Manuel D'emploi

2

Safety instructions

6
This measurement module is built and tested in accor­
dance with EN 61010, Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory
Use, and was in perfect condition when it left production.
To maintain this condition and ensure risk-free operation
(reducing residual risks, EN 61010­1:2010 17 c), the user
must comply with the instructions and warning notices
contained in this operating manual.
2.1

Warning signs and danger symbols

Important instructions for your safety are specifically iden­
tified. It is essential to follow these instructions in order to
prevent accidents and damage to
DANGER
This marking warns of an imminently threatening danger­
ous situation which - if safety requirements are disregarded
- will result in death or serious physical injury.
Notice
This marking draws attention to a situation which - if dis­
regarded - can result in damage to property.
A3757-2.2 HBM: public
property.
MX403B