Automatic Icemaker - GE GSE22 Manuel D'utilisation Et D'installation

Automatic Icemaker

A newly-installed refrigerator may take 12–24 hours to begin making ice.
When the refrigerator has been connected to the water
supply, slide the power switch to the ON position.
(-10°C). When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
Be sure nothing interferes with the sweep of the feeler
arm.
Throw away the first few batches of ice to allow the
water line to clear.
The icemaker will produce seven cubes per cycle -
approximately 100-130 cubes in a 24-hour period,
temperature, number of door openings and other use
conditions.
fills with water.
cloudy, taste stale, and shrink.
49-60514-11
CAUTION
Avoid contact with the moving parts
of the ejector mechanism, or with the heating element
(located on the bottom of the ice maker) that releases the
making mechanism while the refrigerator is plugged in.
Icemaker Accessory Kit
an automatic icemaker, an icemaker accessory kit is
available at extra cost. Check the back of the refrigerator
for the specific icemaker kit needed for your model.
Power
Switch