Using Udirect 2 As A Remote Control - Unitron uDirect 2 Ensemble Guide

Using uDirect 2 as a remote control
The remote control functions are not supported
by some hearing aid models. The streaming
functionality is available for all Unitron wireless
hearing aids. Please ask your hearing healthcare
professional for more information.
Before the remote control functionality can
be used, your hearing healthcare professional
must enable the remote control.
There are two ways to use the uDirect 2
as a remote control:
The neckloop is plugged in with
both ends, and the uDirect 2
must be worn around your neck.
The remote control function is
available as long as you are not
streaming audio.
The neckloop is completely un-
plugged and uDirect 2 is operated
at arm's length. No streaming is
possible in this configuration.
Make sure the uDirect 2 is switched ON.
24
Volume change/SmartFocus (optional)
Press the ( ) volume button on the uDirect 2
to adjust the volume of your hearing aids:
Press ( ) to increase loudness
Press ( ) to decrease loudness
SmartFocus helps you optimize clarity and
comfort for different listening situations
(optional on selected hearing aids). Press the
( ) volume button on the uDirect 2 to adjust:
Press ( ) to increase clarity
Press ( ) to increase comfort
If your uDirect 2 (
configured to adjust SmartFocus, they will no
longer adjust the volume of your hearing aids.
Program change
Use the access ( ) button to change
hearing aid listening programs.
Changing hearing aid programs is
only possible if no streaming is in progress.
Push the home ( ) button to return
to the startup hearing aid program
and volume levels of your hearing aids.
) buttons have been
25