Summary Of Indicator Lights - Unitron uDirect 2 Ensemble Guide

Summary of indicator lights

The indicator lights provide helpful
information as follows:
Power indicator
Charging
Charged and full battery Solid green
Switching ON
Switching OFF
Battery above 20%
<20% battery remaining
* When switching the uDirect 2 OFF, the
power indicator may blink red first while
the uDirect 2 is properly disconnecting all
Bluetooth devices.
** If the neckloop is not connected to the
uDirect 2, the battery level is only shown
during startup, charging and when a button
is pressed.
After unplugging the neckloop the uDirect 2
enters power down mode after 2 minutes
and the Power indicator goes off. Only the
remote control functions can be used while the
neckloop is unplugged.
36
Solid red
Green 2 seconds
Red 2 seconds*
Blink green **
Short blink red**
Battery state
The color of the power indicator informs you
about the uDirect 2 battery state.
The green power indicator indicates a battery
level > 20%.
The red power indicator indicates a battery level
< 20%. Less than 1.5 hours streaming remain and
the battery should be charged.
Audio indicator
The neckloop must be plugged in for
any streaming.
Plug or FM streaming
Bluetooth phone or
music streaming
1 Bluetooth device
connected
2 Bluetooth devices
connected
Bluetooth pairing
Demo sound playing
The Bluetooth pairing indication will be visible
even if the neckloop is not plugged in.
During cable or FM streaming, the audio
indicator will remain orange regardless of
the Bluetooth connection state.
Solid orange
Solid blue
Short blink blue
Double-blink blue
Very fast blue blinking
Solid violet
37