Unitron uDirect 2 Ensemble Guide page 20

A phone call always has priority. You will hear
the ringing indication even when listening to
other audio sources via cable, Bluetooth or
FM. If you reject or terminate the call, audio
streaming will resume.
It is not possible to change hearing aid
programs using the access ( ) button as
long as any audio source is connected to the
uDirect 2.
Most Bluetooth phones connect to the
uDirect 2 as a phone and a music player at the
same time. If you want to listen to music, you
must start the music via your phone; it cannot
be started from the uDirect 2.
Selecting from multiple inputs using the
uDirect 2
With only one audio source (e.g., from a Bluetooth
transmitter), each press of the access ( )
button will pause or resume the audio source.
Multiple sound sources
can be accessed
sequentially by pressing
the access ( ) button.
After each press, the
32
Previously-active
hearing program
3.5 mm plug Bluetooth
(audio jack) music 1
FM Bluetooth
Europlug music 2
uDirect 2 selects the next connected source in
a fixed sequence.
If a source is not connected, the uDirect 2 will
skip over it and proceed to the next source.
After the last connected source in the
sequence, streaming stops and your hearing
aids will resume the previously-active hearing
aid program, indicated by beeps.
Every connected audio source has a fixed place
in the sequence, as shown in the diagram.
Briefly press the access ( ) button until you
reach your preferred audio source.
uDirect 2 will announce each active audio source
as you go through the sequence with spoken
notifications or beeps.
Pause streaming
To temporarily interrupt streaming, e.g., if
someone wants to speak to you in person, briefly
press the access ( ) button on the uDirect 2
as many times as needed until you hear the
beeps announcing the previously-active acoustic
hearing aid program.
To resume streaming, briefly press the access ( )
33