Understanding the indicator lights
Switched on
Solid green
On but no audio
Short blink green
input
Pairing mode
Rapid blue blinking
Streaming mode
Solid blue
Pause mode
Short blink blue
Test mode
Mulit-color blink
For a more detailed explanation of the streamer
indicator lights, please refer to the streamer's
user guide.
24
Testing the audio transmission
The uTV 3 is able to generate a test sound to
check the system.
To start test mode:
Switch on and wear your streamer correctly.
•
Switch off the uTV 3 first,
•
then press the uTV 3 volume
(
) and power (
button simultaneously until
the status light starts to blink in different
colors.
The streamer and the uTV 3 should connect
•
now (blue/green or blue/orange blinks)
and you should hear a sound test melody
through your hearing aids.
The test sound continues for two minutes
•
or until any of the uTV 3 buttons are pressed.
Use the streamer volume (
•
change the volume of the test sound.
If no test sound can be heard, redo the
•
pairing procedure.
)
) buttons to
25