Step 3: Charging Your Streamer - Unitron uTV 3 Guide D'utilisation

Option 4: connecting to the headset socket
Unpack the cable labeled "Analog 3.5 mm".
•
Connect the stereo plug into the "Analog"
•
input of the uTV 3. Plug the other end into
the headset output socket of your TV
12
When connecting the uTV 3 to the headset
socket of your TV, you are able to adjust the
volume via your TV remote control.
Some TVs will switch off their loudspeakers
when plugging the jack into the headset socket
– the TV will not be audible for other people. In
this case, use the Cinch/RCA output socket as
described in Option 3. For further information
on volume adjustment, refer to the section on
adjusting the volume. The uTV 3 can also be
connected to any other audio source such as
an MP3 player, PC or home sound system using
the stereo plug cable.

Step 3: Charging your streamer

To charge the streamer, gently plug it into
the charging slot of the uTV 3 as shown below.
Ensure the integrated plug is inserted into
the streamer charging socket correctly.
Ensure that you are using the correct
charging slot.
13