Step 4: Pairing Utv 3 With Your Streamer - Unitron uTV 3 Guide D'utilisation

Step 4: Pairing uTV 3 with your streamer

If you have received the uTV 3 and the Unitron
streamer together in a complete set, they are
paired already and you may move on to Step 7.
If they were purchased separately, they must
first be paired with each other.
First, put your streamer into pairing mode.
(Check your streamer's user guide for further
details.)
Next, put the uTV 3 into pairing mode.
To manually start pairing mode on the uTV 3:
1. Switch uTV 3 on.
2. Press the pairing button on the back, and
the main indicator light will start rapidly
blinking blue.
3. Make sure uTV 3 and the streamer are
within 1 m (3 ft) range.
16
uTV 3 will remain in pairing mode for two
minutes or until the pairing has been
completed.
Completion of pairing
Wait until both indicator lights turn solid blue.
This can take up to two minutes but usually
occurs within a few seconds.
The uTV 3 basestation can be paired to a
maximum of four streaming devices. A fifth
pairing will replace the first paired device.
The two devices only need to be paired once.
They remain paired after switching off and will
automatically connect after being switched on
again.
17