Unitron uTV 3 Guide D'utilisation page 19

Cause
I cannot hear the sound from the TV via the streamer
Devices are not on
Cables not plugged
in correctly
No audio input to
uTV 3, the light
indicator blinks
green
uTV 3 is in pause
mode
Distance between
streamer and uTV 3
is too far
Some TVs may not output
stereo sound when in
surround sound mode
28
Possible remedy
Turn on devices
Repeat steps 2 and 3
Make sure TV is not muted
Select a 75% volume level on
the TV
Make sure the audio cable
uses an "out" port
Indicated by blue blinking
status lights on both devices.
A short press of the streamer
access ( )
button will resume streaming
Bring devices closer to each
other, 30 m (100 ft) is the
maximum in line of sight
To avoid streaming
interruptions, make sure you
wear your streamer correctly
and keep the uTV 3 within the
operating range
Try switching TV or devices
to stereo output
Cause
Volume during streaming is not comfortable
(too low or too high)
TV audio sources
have different
output volumes
After connecting the uTV 3, the TV loudspeaker is
switched off
The headset output
connection of the TV
is selected
Possible remedy
If uTV 3 is connected to the
optical, coaxial or RCA/Cinch
socket of your TV, adjust the
volume by using the uTV 3
volume buttons
If the uTV 3 is connected to the
headset output of the TV, you
may adjust the volume using
the TV volume control
Adjust volume of your satellite
receiver or set-top box
Adjust the volume using the
streamer volume buttons
Choose another audio output
on your TV such as optical,
coaxial or RCA/Cinch
29