Using The Telephone - Unitron Passport Moxi 3G Guide D'utilisation

Using the telephone

As telephones do not all work the same, you may
experience different results from different phones. You
can use many phones by simply holding the receiver to
your ear, without the need to change to a dedicated
telephone program. Remember to move the handset
slightly up or back to find the position that sounds
best to you.
Depending on the phone type you use, your hearing
healthcare professional might have selected a
dedicated phone program on your hearing
instruments. Therefore your hearing instrument may
have an automatic telephone program (easy-t feature),
which automatically switches you to a dedicated
telephone program when your hearing instrument is
close to a telephone receiver. When the receiver is
moved away from the hearing instrument it will
automatically return to the previous listening program.
If the hearing instrument does not switch to the
telephone program automatically when the telephone
receiver is placed in proximity, the magnet for easy-t
hearing instruments should be attached to the
telephone receiver. The magnet is designed to
strengthen the magnetic field at the ear piece of
hearing instrument compatible telephones.
If your Passport hearing instruments are configured to
work with the wireless uDirect accessory, you might
12
All manuals and user guides at all-guides.com
benefit from a Bluetooth hands free option. Refer to
the uDirect user guide for more information.
If DuoLink is enabled for the automatic phone
program, both hearing instruments are synchronized
and the listening preference for the opposite ear will
also change when an automatic phone program is
activated.
Consult your hearing healthcare professional if you
experience difficulties using your hearing instruments
on the phone.
To affix the optional easy-t magnet:
1. Clean the telephone receiver.
2. Hold the magnet near the "listening end" of your
telephone receiver and release it (figure 1). The
magnet will flip to the appropriate side and seek
the optimal position on the telephone receiver.
3. Place the double-sided tape in this optimal position
on the telephone receiver (figure 2) and attach the
magnet to the tape (figure 3).
Figure 1 Figure 2 Figure 3
13