Operating instructions
Your hearing aids can be adjusted with the use of
an optional Unitron remote.
Remote control
The optional remote control allows you to switch
between different listening programs, and
change your volume or comfort-clarity settings.
Program control
Each time you push the button, you will move to
a new program.
Program 1
(e.g. automatic program)
Program 2
(e.g. speech in noise)
Program 3
(e.g. easy-t/telephone)
Program 4 (e.g. music)
Easy-t/telephone (see pg 23)
Your hearing aids beep to indicate which
program you are in.
20
1 beep
2 beeps
3 beeps
4 beeps
short melody
Volume control
If your remote control has been configured to
adjust volume, you can adjust the volume level
by pushing the + or – button.
As you change the volume, your hearing aids will
beep.
Volume setting
Recommended volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
Comfort-clarity control
If the remote control has been configured to
adjust the comfort-clarity control, you can
adjust the comfort or clarity by pushing the
+ or – button. After each press wait for about
4-5 seconds to allow the hearing aid to adjust to
the new setting.
As you change the comfort-clarity level, your
hearing aids will beep.
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps
21