Operating Instructions; Volume Control - Unitron Shine Guide D'utilisation

Caring for batteries
• Always discard batteries in a safe and
environmentally friendly way.
• To prolong battery life, remember to turn your
hearing instruments off when not in use.
• Remove the batteries and keep the battery door
open while hearing instruments are not in use. This
will allow internal moisture to evaporate.

Operating instructions

Your hearing instrument may come with 2 controls
that allow for further adjustment.

Volume control

If the rotary dial or scroll wheel has been configured
as a volume control, you can adjust the loudness of
your hearing instruments by rotating the rotary dial
slowly forward towards your nose or the scroll wheel
slowly upward towards the ceiling to increase the
volume or slowly backward away from your nose or
the scroll wheel slowly downward towards the floor to
decrease the volume.
As you change the volume level, your hearing
instruments will beep. Please refer to the chart below
to learn more about the different volume beeps.
8
All manuals and user guides at all-guides.com
Volume setting
Ideal volume level
Maximum volume level
Minimum volume level
Push button
Your hearing instrument may be equipped with a push
button which has been set for switching between
programs or adjusting your volume.
Program control
If you have an active push button program control,
each time you push the button, you will move to a
new program.
Your hearing instruments beep to indicate which
program you are in (i.e. one beep for program 1, two
beeps for program 2, etc.).
Program 1 (e.g. listening in quiet)
Program 2 (e.g. group/party noise)
Program 3 (e.g. telephone)
Beep
1 beep
2 beeps
2 beeps
1 beep
2 beeps
3 beeps
9