Tested Personal Protective Equipment; Type-Identical Identification Mark - Dräger CPS 6800 Notice D'utilisation

Description
3.4

Tested personal protective equipment

CAUTION
!
Only the following
equipment are tested and approved.
For non-Dräger approved combinations, the operator
must independently
combination is appropriate.
3.4.1 Full face masks if equipped with a face cuff
Dräger FPS 7000

Panorama Nova

Dräger X-plore 6000 EPDM

3.4.2 Compressed air breathing apparatus
PA 90

PSS 100

PSS 3000

PSS 5000

PSS 7000

3.4.3 Closed-circuit breathing apparatus
PSS BG 4 PLUS

3.4.4 Compressed air hose breathing respirators
Abil

PAS Lite

PAS Micro

PAS Colt

PAS Colt Harness

3.4.5 Lung demand valves
All lung demand valves in the PSS series

3.4.6 Safety helmets
Dräger HPS 3000 Series

Dräger HPS 4000 Series

Dräger HPS 6000 Series

Dräger HPS 7000 Series

Industrial helmet

26
combinations of protective
determine whether such
3.5

Type-identical identification mark

The type-identical identification mark is found on the pocket in
the chemical protective suit.
Caution! Strictly follow the Instructions for
Use.
Protective clothing against gaseous, liquid,
aerosol and solid chemicals (according to
EN 943-1:2015, type 1b)
Protective clothing against infective agents
(according to EN 14126:2003+AC:2005,
type 1b-B)
Protective clothing against radioactive
contamination by solid particles (according
to EN 1073-1:2016+A1:2018
EN 1073-2:2002 (for classes, see 3.3))
Assignment of height, waist and chest
measurement to the size of the chemical
protective suit (see Chap. 9 on Page 37).
and
Dräger CPS 6800