Description Of The Symbols - Ayce PLCDL-M136JS-12V Manuel D'utilisation

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks. The
safety symbols and the explanations that accompany them must be perfectly understood.
The warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
Before any use, refer to the corresponding section in this
user manual.
Conform to CE safety standards
Class II machine – Double insulation – You don't need any
earthed plug
The crossed-out wheeled bin symbol indicates that the
item should be disposed of separately from
Li-ion
household waste. The item should be handed in for
recycling in accordance with local environmental
regulations for waste disposal.
By separating a marked item from household waste,
you will help reduce the volume of waste sent to
incinerators or land-fill and minimize any potential
negative impact on human health and the environment.
fuse
Use this device indoors only
Do not expose the battery to fire or incinerate
Non esporre o immergere la batteria in acqua
Non esporre la batteria a temperature superiori a 40°C
MAX.40°C
Polarity of the output terminal
Proven safety of the Federal Inspectorate for Heavy
Current Installations ESTI
2. Product symbols
In this manual and/or on the machine the following symbols are used. These
represent important information about the product or instructions on its use.
12V 2Ah li-ion
battery pack
Li-ion 12 V
Li-ion 12 V 2,0 Ah
2,0 Ah
0-350/0-1300/min
variable speed
min -1
min -1
0-350
0-1300 0-350
0-1300
10mm keyless
plastic chuck
10 mm
10 mm
82 | 83
GB GB
Max. torque 18Nm
18 Nm
18 Nm
90min Charging time
90 min
90 min
With a LED worklight
to illuminate the
work area
LED
LED