General Power Tool Safety Warnings - Ayce PLCDL-M136JS-12V Manuel D'utilisation

• When transporting individual batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them and cause a short
circuit.
The best storage place is one that is cool and dry away from direct sunlight and excess
•
heat or cold.
• If the battery pack has been stored for a long time, you should activate the battery pack
first before using it.
•
The battery is to be disposed of safely.
EXTRA SAFETY REGULATIONS CONCERNING BATTERY CHARGER
Before using the charger, read all the instructions and cautionary markings on the
•
charger and battery pack as well as the instructions on the battery pack.
•
Only charge your battery pack indoors as the charger is designed for indoor use only.
• DANGER: If the battery pack is cracked or damaged in any other way, do not insert it in
the charging base. There is a danger of electric shock or electrocution.
• WARNING:Do not allow any liquid to come into contact with the charger. There
is a danger of electric shock.
• The charger is not intended for any use other than charging the exact type of
rechargeable battery pack as supplied with the charger. Any other use may result in
the risk of fire, electric shock or electrocution.
The charger and battery pack supplied with it are specifically designed to work together.
• Do not attempt to charge the battery pack with any other charger than the one supplied.
Do not place any object on top of the charger as it could cause overheating.
•
Do not place the charger near any heat source.
Pull on the charger to disconnect it from the power source. Do not pull on the lead.
•
• Make sure that the charger lead is positioned where it will not be stepped on, tripped
over or otherwise subjected to damage or stress.
•
Do not use an extension cord unless it is absolutely necessary. The use of an improper
extension cord could cause the risk of fire, electric shock or electrocution.
• Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise
repair.
•
or repair is required. Incorrect re-assembly may result in the risk of fire, electric shock
or electrocution.
•
To reduce the risk of an electric shock, unplug the charger from the power supply
before attempting to clean it. Removing the battery pack alone does not reduce the risk.
• The charger is designed for use from a standard household electrical supply. Do
not attempt to connect the charger to a supply with a different voltage.
This appliance can be used by children aged from 8 years and above and persons
•
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision .
Children should be supervised to ensure that they do not play with the charger.
•
Do not expose charger to rain or snow.
•
Do not mount charger on wall or permanently affix charger to any surface. The
•
charger is intended to use on a flat, stable surface(i.e. table top, bench top)
Never attempt to connect two chargers together.
•
•
the battery charger may result.
Disconnect the charger from the outlet before attempting any cleaning. This will
•
reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
Never recharger a fully charged battery cartridge.
•
Do not charge non-rechargeable batteries.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings and all instructions. Failure to follow all the
warnings and instructions may result in electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools.
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
78 | 79
GB GB