Mounting The Luminaire Of Mounting Type "Top, Suspended - Waldmann TAMETO Mode D'emploi

ENG
C
Fig. 7: Mounting the bracket for mounting
type "Top, fixed" , 2nd option.
X Mount the two enclosed brackets B
on the luminaire using the enclosed
screws C and the slide nuts and tighten
the screws, see Fig. 6 or see Fig. 7 .
Fig. 8: Mounting the luminaire of mounting
type "Top, fixed" , 1st option.
Fig. 9: Mounting the luminaire of mounting
type "Top, fixed" , 2nd option.
X Mount the luminaire on the mount-
ing surface using suitable screws and
tighten the screws, see Fig. 8 or see
Fig. 9.
26
3.4 Mounting the luminaire of
mounting type "Top, sus-
pended"
B
b
No. Dimension
SAHZ 139
SAHZQ 66
a
SAHZ 154
SAHZQ 88
b approx. 300 – approx. 1360 mm
SAHZ 139
SAHZQ 66
c
SAHZ 154
SAHZQ 88
Tab. 2: Dimensions.
X Mount two suitable fastening hooks
on the system workstation. To do so,
use the dimensions of the luminaire,
see Tab. 2.
X Hold the cable reel of the rise-and-fall
pendant and unscrew the ceiling rose
from each cable reel.
X Suspend the luminaire by hanging the
two cable reels with the eyelets into
the hooks.
Mounting
a
c
750 mm
1050 mm
956 mm
1256 mm