4-Relay Receiver; Training Procedure - Adeunis RF ARF 18 Notice D'emploi

2.4.3 4-relay receiver

2.5.

Training procedure

You can save up to 83 remote controls for one receiver.
For this operation we recommend cutting the electricity supply to the contacts.
This section describes the procedure designed to associate a remote control with the ARF7341's outputs; this
association is also called the training procedure. This procedure is compulsory.
This section also describes how to erase all the remote controls associated with the receiver.
The training process is initiated by the five switches SW1 to SW5 on the receiver; you can carry out two types
configuration:
1. The standard training procedure which covers 99% of industrial applications.
2. The advanced training procedure for a small number of specific applications.
Gamme ARF18 UG V1.5 44