Cattani Micro- Smart Manuel D'utilisation page 35

Run mode (it describes the machine's running mode)
User Parameters menu
To access this menu and/or make any changes, you are
required to enter the access password 0000123000 (see
instructions on page 31).
Vacuum Set Point
This is the fi gure to which the unit will limit the vacuum.
Press the I Enter Key to make the cursor appear.
The fi gure can be changed using the arrow keys
Press the Enter Key again to confi rm and continue.
I
Language
It is possible to choose either English (1) or Italian (0),
French (2), German (3) for the displayed language.
Press the Enter Key to enable the cursor and use the
I
arrow keys
I
Press the Enter Key again to confi rm the change and
continue.
Generated Code
This code is generated by Cattani S.p.A. Each unit is allo-
cated a unique code. At present this code is not used.
Activation Code
At present this code is not used.
34
to select 0 or 1 or 2 or 3.
.