Cattani Micro- Smart Manuel D'utilisation page 32

Entering Access Passwords
The Drive Status menu is the only menu that can be acces-
sed without the use of an access password.
To enter the User Parameters and System Parameters Se-
tup menus, you must fi rst enter an access password.
The access password for the User Parameters menu is
0000123000.
The access password for the System Parameters Setup
menu is 0000456000.
From the CATTANI S.p.A. menu, press
The Access Password
0000000000 should then be displayed.
I
Press the Enter Key which will make a cursor appear
on the last zero to the right.
Press until the cursor is fl ashing on the 6th zero.
Press until number 1 appears.
Press to move to the next zero and then press
until number 2 appears.
Press to move to the next zero and then
until number 3 appears.
I
Press the Enter Key to confi rm the password. The
cursor will disappear.
Press to return to the Cattani S.p.A. menu.
It is now possible to modify the parameters of the User
Parameters menu.
Repeat the same process and enter the password
0000456000 instead of 0000123000 to gain access to the
System Parameters Setup menu.
and then
screen Access Password
.
press
31