Beurer BM 77 Mode D'emploi page 37

Like any medical measurement method, the precision of HSD
is limited and can lead to incorrect results in some cases.
Nevertheless, the blood pressure measurements taken when
the user's circulatory system is sufficiently at rest represent
particularly reliable results.
Displaying and deleting measurements
The results of every successful measurement are stored
together with the date and time. If there are more than 60
measurements, the oldest measurements are lost.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the Start/
stop button .
• Within 3 seconds of the full-screen display appearing,
select the desired user memory ( / ) with the M1 or
M2 memory button.
– To view the measurements for user memory , press
the M1 memory button.
– To view the measurements for user memory , press
the M2 memory button.
If Bluetooth is activated (the
®
display), measurements are automatically transferred.
Press the M1/M2 button to cancel data transfer. The
device will show average values. The
longer shown.
If you have selected user memory1, the M1 memory
button must be pressed.
If you have selected user memory2, the M2 memory
button must be pressed.
37
symbol appears on the
symbol is no