Beurer BM 77 Mode D'emploi page 33

Masquer les pouces Voir aussi pour BM 77:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
appears if the measurement could not
be performed properly. In this case, please
read the section "What if there are prob-
lems?".
• Now select the desired user memory by pressing the
M1 or M2 memory buttons. If you do not select a user
memory, the measurement is stored in the most re-
cently used user memory. The relevant symbol
appears on the display.
• If the Bluetooth
function has been activated, the data
®
transfer to the "beurer HealthManager" app starts after
confirming the user selection using the START/STOP
button.
• The Bluetooth
symbol flashes on the display. The de-
®
vice now attempts to connect to the app for approx. 30
seconds.
• The Bluetooth
symbol stops flashing as soon as the
®
connection is established. All measurement data is
transferred to the app. Once the data transfer is suc-
cessfully complete, the device switches off automati-
cally.
• If a connection to the app cannot be established after
30 seconds, the Bluetooth
device switches off automatically after 3 minutes.
• If you forget to turn off the device, it will switch off
automatically after approx. 3 minutes. In this case too,
the value is stored in the selected or most recently used
user memory.
or
symbol goes out and the
®
Transfer of measurements via Bluetooth
In addition to displaying and saving your measurements locally
on the device, you have the option of transferring your mea-
surements to your smartphone using Bluetooth
technology.
The software can be downloaded free of charge from the
download area under Service at www.beurer.com.
System requirements for the " beurer HealthManager" app
– iOS ≥ 10.0, Android
TM
– Bluetooth
≥ 4.0
®
List of compatible devices:
To transfer the measured values, proceed as follows:
Step 1:
Activate the Bluetooth
as described in section "Setting the hour for-
mat, date, time and Bluetooth
Step 2:
In the "beurer HealthManager" app, add the
BM 77 under Settings / Devices and follow the
instructions.
33
®
low energy
®
≥ 5.0
BM 77
function on your device
®
".
®
" beurer HealthManager" app

Publicité

Table des Matières
loading

Table des Matières