Step 2: Connecting The Projector; Connecting To A Vcr - Sony VPL-BW7 Mode D'emploi

Step 2: Connecting the Projector

When making connections, be sure to do the following:
• Turn off all equipments before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or
poor picture quality. When pulling out a cable, be sure to pull it out with holding the
plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.

Connecting to a VCR

To connect to a DVD player/recorder and Blu-ray Disc player equipped with
HDMI output
You can enjoy better picture quality by connecting a DVD player/recorder and Blu-ray
Disc player equipped with HDMI output to the HDMI input of the projector.
Rear of the projector
UT A
INPUT
: Video signal flow
............................................................................................................................................................
This projector supports PC Display input of HDMI. It also supports HDCP.
18
GB
SERVICE
to HDMI output
HDMI cable (not supplied)
When using an optional HDMI cable, be sure to use
a cable that has acquired an HDMI logo.
Speakers
AV amplifier
DVD player/recorder and
Blu-ray Disc player, etc.,
with the HDMI output