Step 3: Adjusting The Picture Position - Sony VPL-BW7 Mode D'emploi

Step 3: Adjusting the Picture Position

Project an image on the screen and adjust the picture position.
8 7
1
After connecting the AC cord to
the projector, plug the AC cord
into a wall outlet, connect all
equipment, and remove the lens
cover.
The ?/1 (On/standby) switch lights in
red and the projector goes into standby
mode.
2
Press the /
? 1
switch to turn on the projector.
The ?/1 (On/standby) switch flashes in
green, then lights in green.
22
GB
1 5
(On/standby)
1,2 4 6
4
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the input
indication and equipment to be projected
change. (1 page 27)
2
6