Connecting The Projector; Connecting With A Computer - Sony VPL-CX80 Mode D'emploi

Connecting the
Projector
When you connect the projector,
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself.
To connect the projector, refer to
the illustrations on the next and the
following pages.

Connecting with a Computer

This section describes how to connect the
projector to a computer.
For more information, refer to the
computer's instruction manual.
To connect a computer
Right side
INPUT A
VIDEO IN
S VIDEO
OUTPUT
MONITOR
3
to audio output
to USB connector
to monitor output
1 Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2 USB cable (supplied)
(Connect the USB cable to use a wireless
mouse.)
3 HD D-sub 15-pin cable (supplied)
Notes
• The projector accepts VGA, SVGA, XGA,
SXGA and SXGA+ signals. However, we
recommend that you set the output mode of

Connecting the Projector

INPUT B
AUDIO
VIDEO AUDIO
REMOTE RS-232C
AUDIO
2 1
Computer
17
GB