Control Panel - Sony VPL-CX80 Mode D'emploi

Control Panel

1
INPUT
2
3
I / 1 (on/standby) key
1
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the I / 1
key lights in green when the power is
turned on.
2 ON/STANDBY indicator (located
around the I
Lights up or flashes under the following
conditions:
– Lights in red when an AC power cord
is plugged into a wall outlet. Once in
standby mode, you can turn on the
projector with the I / 1 key.
– Lights in green when the power is
turned on.
– Flashes in green while the cooling fan
is running after the power is turned off
with the I / 1 key. The fan runs for
about 60 seconds after the power is
turned off.
12
GB
Location and Function of Controls
4
5
PUSH
TILT MENU
ENTER
6
7
FOCUS
8
ZOOM
SIDE SHOT
9
POW ER STAN DBY
0
TEM P/F AN
LAM P/C OV ER
/ key)
1
For details on the I/1 indicators, see
page 22.
3 INPUT key
4 TILT adjustment key
For details, see "Projecting" on
page 20.
5 MENU key
Displays the on-screen menu. Press
again to clear the menu.
6 ENTER/Arrow(
Enter the settings of items in the menu
system.
Select the menu or make various
adjustments.
7 FOCUS +/– keys
Adjusts the picture focus.
8 ZOOM +/– keys
Adjusts the picture size.
9 SIDE SHOT +/– key
Adjusts the horizontal trapezoidal
distortion/H keystone correction of the
picture.
For details, see "Side Shot" on page 35
and ""Side Shot" and "V Keystone"
Adjustments" on page 56.
q; Indicators
• POWER SAVING
Lights when the projector is in power
saving mode.
• TEMP (Temperature)/FAN
Lights or flashes under the following
conditions:
– Lights when the temperature inside
the projector becomes unusually
high.
– Flashes when the fan is broken.
For details on the TEMP/FAN
indicator, see page 43.
• LAMP/COVER
Lights or flashes under the following
conditions:
– Lights when the lamp has reached
the end of its life or reaches a high
temperature.
/ / / ) keys
f F g G