Control Panel - Sony VPL-FX51 Mode D'emploi

Location and Function of Controls
qs Adjuster
Use the adjusters to keep the projector level if it is
installed on an uneven surface.
Adjust the height so that the projector becomes level.
The projector is raised by turning the adjusters
clockwise, or it is lowered by turning them
counterclockwise.
qd Air filter
To remove the air filter, pull it out horizontally with
this part.
For details, see "Cleaning the Air Filter" on page 31 (GB).
Note
When replacing the lamp, also clean the filter to
ensure optimal performance.
10
(GB)

Control panel

1 2
TEMP/FAN
LENS CONTROL
MENU
RESET
ENTER
9 8 7
1 LENS CONTROL key
Enters the focus, zoom or shift adjustment mode. Next
adjust them using the arrow keys. Each time you press
the key, the mode changes to LENS FOCUS, LENS
ZOOM and LENS SHIFT in order. The mode
currently selected is displayed on the screen.
LENS FOCUS: Enters the focus adjustment mode.
Next adjust the focus using the arrow keys. Press
the M or , key to focus on a picture further
back, and the m or < key to focus on a forward
picture. You cannot select LENS FOCUS when
you attach the optional lens.
LENS ZOOM: Enters the zoom adjustment mode.
Next adjust the picture size using the arrow keys.
Press the M or , key to enlarge the picture size,
and the m or < key to reduce it. You cannot
select LENS ZOOM when you attach the optional
lens.
LENS SHIFT: Enters the shift adjustment mode.
Next adjust the vertical position of the picture
using the arrow keys. Press the M or , key to
move the picture upward, and the m or < key to
move it downward.
2 Arrow keys (M/m/</,)
Used to adjust focus, zoom and shift, or to move the
cursor or make various adjustments in the menu.
3
LAMP/COVER
POWER SAVING ON/STANDBY
INPUT
APA
6 5 4