Lenze Global Drive Keypad E82 Instructions De Montage page 91

Main menu
No. Display
9 Controller
10 Terminal I/O
EDK82ZBC DE/EN/FR 4.0
Parameterisation 8200 vector/8200 motec
Submenus
No. Display
9.1 V/f−Ctrl
9.2 Vector−Ctrl
9.3 PCTRL setpt
9.4 PCTRL act val
9.5 PCTRL setup
9.6 Current setup
9.7 Setpt setup
9.8 Ramp times
9.9 DCB (DC brk)
9.10 Fault monit
10.1 AIN1
10.2 AIN2
10.3 AOUT1
10.4 AOUT2
10.5 DIGIN1/PTC
10.6 RELAY1
10.7 RELAY2
10.8 DIGOUT1
10.9 DIGOUT2
10.10 DFIN1
10.11 DFOUT1
10.12 MPOT1
l
Menu structure
Description Description
Configuration of internal control
parameters
V/f characteristic control
Vector control
Process controller setpoints
Actual process controller values
Process control
Current limits and current
controllers
Setpoints
Acceleration times, deceleration
times
DC injection brake
Fault monitoring, fault display
Linking of inputs and outputs to
internal signals and display of
signal levels at the terminals
The type and the equipment of
the controller determine the
submenus that are displayed.
Analog input 1
Analog input 2
Analog output 1
Analog output 2
Digital inputs and PTC input
Relay output 1
Relay output 2
Digital output 1
Digital output 2
Frequency input
Frequency output
Motor potentiometer function
7
91