Lenze Global Drive Keypad E82 Instructions De Montage page 83

Main menu
No. Display
EDK82ZBC DE/EN/FR 4.0
Parameterisation 8200 vector/8200 motec
Submenus
No. Display
5.9 OpenLoopV/f 5
5.9.1 CAN managem
5.9.2 Freq setpt
5.9.3 f limit/ramp
5.9.4 Motor param
5.10 OpenLoopV/f 7
5.10.1 FIF managem
5.10.2 Freq setpt
5.10.3 f limit/ramp
5.10.4 Motor param
Open−loop speed control in the "Vector control" operating mode
5.11 Vector−Ctrl 0
5.11.1 Freq setpt
5.11.2 f limit/ramp
5.11.3 Motor param
5.11.4 Motor ident
l
Menu structure
Description Description
Operation with the system bus
(CAN) function module on FIF
Frequency setpoint via process
data channel (CAN−IN1.W2)
System bus (CAN)
communication set−up
Frequency setpoint configuration
Output frequency, acceleration
time and deceleration time
configuration
Motor current control
configuration, motor monitoring
Operation with fieldbus function
module on FIF (DRIVECOM
control)
Frequency setpoint via process
data channel
Fieldbus communication set−up
Frequency setpoint configuration
Output frequency, acceleration
time and deceleration time
configuration
Motor current control
configuration, motor monitoring
Analog frequency setpoint via
analog input 1 (AIN1)
Frequency setpoint configuration
Output frequency, acceleration
time and deceleration time
configuration
Motor current control
configuration, motor monitoring
Identifying motor parameters
7
83