Recording From Cds; Recording Your Own Programme - Sony CDP-XA50ES Mode D'emploi

Recording From CDs

Recording Your Own
Programme
You can record the programme you've created on a
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
CHECK
CDP-XA50ES
PLAY MODE
CHECK
CDP-XA30ES
PLAY MODE
CONTINUE
Number
buttons
>10
P
=/+
1
2
CLEAR
≠ AMS ±
3
4
· ∏
CLEAR
≠ AMS ±
5
· ∏
PROGRAM
CLEAR
CHECK
·
Recording From CDs
Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
See "Creating Your Own Programme" on page 14.
When you record on both sides of the tape, press
∏ to insert a pause.
The "P" indication appears in the display and the
playing time is reset to "0.00."
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
Repeat Step 1 to create the programme for side B.
Start recording on the deck and then press · on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
When you record on side B, reverse the tape and
press · or ∏ on the player to resume playing.
To check and change your programme
See pages 15 and 16.
"SIDE-A" appears while checking the programme for
side A and "SIDE-B" while checking the programme for
side B.
You can automatically insert a blank space of 3
seconds between each track
Use the Auto Space function (see page 21).
EN
17