Recording From Cds; Recording Your Own Programme - Sony CDP-XB740 Mode D'emploi

Checking the track order
You can check your programme before or after you
start playing.
Press CHECK.
Each time you press this button, the display shows the
track number in the programmed order. After the last
track in the programme, the display shows "– END –"
and returns to the original display. If you check the
order after you start playing, the display shows only
the remaining track numbers.
Changing the track order
You can change your programme before you start
playing.
To
Erase a track
Erase the last track in the
programme
Add tracks to the end of the
programme
Erase the whole programme
completely
Playing CDs
You need to
Press CHECK until the track
you don't want appears in
the display, then press
CLEAR.
Press CLEAR. Each time you
press the button, the last
track will be cleared.
Turn l AMS L until
the track number you want
to add appears, then push
l AMS L.
When using the remote,
press the number buttons of
the tracks to be added.
Hold down CLEAR until
"CLEAR" appears in the
display. Create a new
programme following the
programming procedure.

Recording From CDs

Recording From CDs Recording From CDs Recording From CDs
Recording Your Own
Programme
You can record the programme you've created on a
tape, DAT or MD. The programme can contain up to 24
tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
PLAY MODE
1
Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in "Creating a programme on
the player" on page 13 or Steps 1 and 2 in
"Creating a programme using the remote" on page
14.
"TAPE A" appears in the display.
2
When you record on both sides of the tape, press
X to insert a pause.
"P" and "TAPE B" appear in the display and the
playing time is reset to "0.00."
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3
Repeat Step 1 to create the programme for side B.
4
Start recording on the deck and then press H on
the player.
When you record on both sides of the tape, the player
pauses at the end of the programme for side A.
5
When you record on side B, reverse the tape and
press H or X on the player to resume playing.
z
To check and change your programme
See page 15.
"TAPE A" appears while checking the programme for
side A and "TAPE B" appears while checking the
programme for side B.
l AMS L
H X
(Continued)
15 GB