Recording From Cds; Recording Your Own Programme - Sony CDP-M305 Mode D'emploi

Recording From CDs

Recording Your Own
Programme
You can record the programme you've created on a
tape. The programme can contain up to 24 tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
PROGRAM
PROGRAM
Number
buttons
>10
P
(
=/+
1
Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in "Creating Your Own
Programme" on page 9.
A
The indication appears in the display.
2
When you record on both sides of the tape, press
P to insert a pause.
A B
The "P" and " " indications appear in the
display and the playing time is reset to "0.00."
When you record on one side of the tape, skip this
step and go to Step 4.
A pause is counted as one track
You can programme up to 23 tracks when you insert a
pause.
3
Repeat Step 1 to create the programme for side B.
4
5
=/+
P
·
(CDP-M305 only)
Start recording on the deck and then press · (()
on the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
When you record on side B, reverse the tape and
press · (() or P on the player to resume
playing.
To check and change your programme
See page 10.
A
The indication appears while checking the
B
programme for side A and
programme for side B. (CDP-M305 only)
When tracks, which aren't numerically consecutive on
the disc, are programmed consecutively (i.e. 1, 3, 5
etc.)
A one-second access time blank is added between the
tracks.
while checking the
EN
11