Playing Cds; Customising The Sound Of Your Music (Digital Filter Function) - Sony CDP-XA50ES Mode D'emploi

Playing CDs

Playing CDs
Customising the Sound of Your
Music (Digital Filter Function)
This player has a variable coefficient (V.C.) digital
filter. By selecting the type of filter you want, you can
adjust the sound to match your system, your room, the
music source, etc.
CDP-XA50ES
CDP-XA30ES
Selecting the filter directly on the player
1
Press FILTER.
The display shows the currently selected filter
number and the filter indicator flashes.
2
Turn ≠ AMS ± until the digital filter number
you want appears in the display.
As you turn the ≠ AMS ± control, the digital
filter number changes cyclically as follows:
n STD n 1 n 2 n 3A n 3b n 3C n 4A n 4b n 4C
If you are playing a disc, the sound will be
interrupted momentarily.
EN
8
FILTER ≠ AMS ±
FILTER ≠ AMS ±
DIGITAL FILTER
3
Push ≠ AMS ± to select the filter.
The original display reappears.
The selected digital filter number is stored in
memory even if you turn off the power.
You can also change the digital filter number by
pressing the FILTER button while the indicator is
flashing
Selecting the filter using the remote Z
1
Press DIGITAL FILTER.
The display shows the currently selected filter
number and the filter indicator flashes.
2
Press DIGITAL FILTER repeatedly until the
display shows the digital filter number you want.
The digital filter number is stored and the original
display reappears.
What is a variable coefficient (V.C.) digital
filter?
CD players use digital filters to eliminate the noise
generated during sampling. You can change the tone of
your music by changing the cutoff characteristics of the
digital filter.
This player has five types of filters with different
coefficient characteristics: "STD," "1," "2," "3" and "4."
In addition, digital filters "3" and "4" each have three
coefficient patterns, A–C, for more detailed
adjustments.
The following explains the terms you need to know to
understand the characteristics of the digital filters used
in this player.
Sharp roll-off and slow roll-off
Digital filters can be roughly classified into sharp roll-
off types and slow roll-off types, according to their
cutoff characteristics.
Response
(Slow roll-off filter)
(dB)
0
(Sharp roll-off filter)
-120
0 22.05k
Frequency (Hz)
Comparison of cutoff characteristics for sharp roll-off filter
and slow roll-off filter