Product Operation; Control Panel With Instruments; Main Screen - Tecno-gaz TYGI 350 B Manuel D'utilisation

INSTRUCTIONS FOR USE

8 PRODUCT OPERATION

Control panel with instruments

8.1
The touch screen display is legible in each working position of the dentist (both sitting and standing).
8.1.1

Main screen

The main screen is displayed after turning the unit on.
24.AUG
DR.SMITH
Current time and date
24.AUG 12:12
Time and date can be set in user menu
Alarm
It serves to warn the dentist. It has the function of timer.
The time is adjustable. Press the button to display menu with available times. One of them marked as "U" can
be set in the user menu. By pressing the button with desired time the time starts to count down to zero value
by 1 second. By repeated pressing of the button during countdown the timer function is cancelled. When the time at
countdown reaches 00:00, an audible signal sounds.
User
Displayed information about the current user. Selection of four users is available, i.e. data for four users
is stored in the memory. By pressing the button a pop-up menu is displayed with available users.
To select the user, press the respective button. User name can be edited in the user menu. After the desired item has
been pressed, the display is reset and the parameters are set for the selected user.
Turning the negatoscope on/off
Press the button to increase brightness of the display backlight to 100% and place the negative onto the
display. To cancel the function, press the button again and the brightness will return to previous level. The
negatoscope can be turned on when an instrument is taken off its holder.
If a picture is selected from inserted and recognized USB key by using USB menu, then the current picture is displayed
instead of white background.
UM_EN_TYGI350B_2018-09_ver1.0
12:12
TYGI 350 B
TYGI 350 B
10 / 49