Display Rotation - coval GVMAXV2-2 Instructions De Service

DIRECTIONS FOR USE - GVMAXV2-2/V2-2R
v03.20
Setting the contact output 2 configuration (NO or NC)
1. Press the M button for more than 3 seconds.
2. The display is alternating between ot1 and
HyS.
3. Press 3 times on M.
4. The display alternately indicates the setting
in progress of output 2 (ot2 – no).
5. To change this setting, press the +/– keys
until the required value is displayed (no for
normally open or nC for normally closed).
6. To save and return to the measurement
screen, press 3 times on M.
11.4 LOCKING / UNLOCKING
The locking of the settings guarantees that they
cannot be changed by mistake.
1. To activate or deactivate the locking, push
simultaneously and during 3 seconds the M
and the + keys.
2. The display alternately indicates Loc and
the current setting:
- oFF keypad unlocked
- on keypad locked
3. The + and – keys allow the change of the
setting.
4. To save and return to the measurement
screen, press once on M.
11.5 180° DISPLAY ROTATION
1. To rotate the display press on M during 3
seconds at least.
2. The display is alternating between ot1 and
HyS.
3. Press 5 times on M.
4. The display alternately indicates rot and
the current setting:
- oFF unrotation
- on rotation
5. Use + and – keys to select 180° display
rotating setting.
6. To save and return to the measurement
screen, press once on M.
www.coval.com
1 2
3s
4
2 2
5
C C
1
3
Note: Keypad locked, Loc displays when
pressing any key. After some time, it would be
returned to measurement screen.
1 2
3s
4
F F F F
5
- 43 -
3
1 1 h h s s
x3
6
- - 7 7 5 5
x3
2
3s
L L C C
4
- - 7 7 5 5
3
1 1 h h s s
x5
6
EN
F F F F