Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
3. OPERATION
Then 00:00 will be displayed. With the
economy, or anti-freeze, for the first time period (from 12am (00:00) to 1am (01:00)):
Press
to switch to the next time slot (from 1am to 2am) and repeat the above process to choose
the desired operating cycle (comfort, economy or anti-freeze). Repeat the process hour by hour y day
by day.
If you wish to change a specific time slot, please select the day of the week and
search for that time slot by pressing the
changes, in order to exit the menu please press the
you exit of the sub-menu and the room temperature is displayed again.
RCTT
38
or
buttons, choose the operating cycle: comfort,
Comfort Cycle = Sun Red LED switched on
Economy Cycle = Moon Green LED switched on
Anti-freeze Cycle = Green LED flashing
The anti-freeze temperature is set at 7ºC.
This temperature can not be changed.
Once you have set the time schedule for the
entire week, the radiator will follow this chosen
plan. Please make sure that the radiator is on the
PROGRAMMING mode (hand LED switched off).
A bright blue dot will flash on the right
side of the screen when the radiator is
heating.
In the "PLCF" plan, the radiator follows
the time schedule defined by the
user, according to their needs and in
accordance with the indicated comfort,
economy or anti-freeze cycles.
button. Once you have made the
button repeatedly until
Publicité
Table des Matières
