Time Schedules - Haverland Rctt Manuel D'installation Et Utilisation

EN 3. OPERATION

3.11 TIME SCHEDULES

The radiator has 2 preset programmes schedules, configured from the factory, and 3 bespoke
program, which can be modified by the user. To facilitate the device's programming, apart from
the schedule modifiable by the "PLCF" user, the PL03 and PL04 pre-set programmes have been
modified so that both of them can be modified to suit your needs.
These four preset programs are suited for the majority of heating situations you may need. In
this sub-menu you can choose one of the 2 time schedules or the bespoke plans
- Comfort on Monday to Sunday from 10am to 12am. Remaining hours, economy.
PL01:
PL02:
- Comfort on Monday to Friday from 7am to 9am, 12pm to 4pm and 6pm to 12am.
Remaining hours, economy.
- Comfort on Saturday and Sunday from 10am to 12am. Remaining hours, economy.
- Comfort on Saturday and Sunday from 10am to 12am. Remaining hours, economy.
PL03:
You only need to programme Monday (dd01). The programme will be automatically repeated.
PL04:
You only need to programme Monday (dd01) and Saturday (dd02).
The programme will be repeated from Monday to Friday and from Saturday to Sunday.
The "PLCF" bespoke program can be modi ied. By default, it is set with the following schedule:
PLCF:
- Comfort on Monday through Friday from 7am to 2pm and 3pm to 7pm. Remaining
hours, economy. On Saturday and Sunday, economy.
The comfort and economy cycles will take into account the comfort and
economy temperatures predefined in the previous steps (points 3.9 and 3.10).
PL01, PL02 preset programme schedules:
RCTT
36
Once the word "PLAn" is displayed on
the sub-menu, press
time schedules into the sub-menu.
The "PL01" plan will be displayed on
screen.
Then, press the or
to choose the desired programming
schedule.
Choose one of the four preset time
schedules, for example "PL02".
to enter the
buttons