Approved Combinations Of Cutting Tool, Deflector, Handle And Harness - Stihl FS 80 Notice D'emploi

English
Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting tools
1 STIHL SuperCut 20-2
2 STIHL AutoCut 25-2
3 STIHL AutoCut C 25-2
4 STIHL TrimCut 30-2
5 STIHL PolyCut 20-3
6 STIHL FixCut 20-3
7 Grass cutting blade 230-2
8 Grass cutting blade 230-4
9 Grass cutting blade 230-8
10 Grass cutting blade 250-40 Spezial
11 Brush knife 250
12 Scratcher tooth circular
saw blade 200
13 Chisel tooth circular
saw blade 200
Grass cutting blades, brush knifes and
circular saw blades made of any other
non-metal material are not permitted.
Deflectors
14 Deflector for mowing heads only
15 Deflector with
16 Skirt and blade for all mowing heads
(see "Mounting the deflector")
17 Deflector without skirt and blade
for all metal mowing tools
18 Limit stop for circular saw blades
18
Handles
19 Loop handle
20 Loop handle with
21 Barrier bar
22 Bike handle
Harnesses
23 Shoulder strap may be used
24 Shoulder strap must be used
25 Full harness may be used
26 Full harness must be used
Equipment
Among other parts, the complete unit
includes:
– Cutting tool
– Deflector
– Handle
– Shoulder strap
Select the correct combination from the
table according to the cutting tool you
intend to use. Read the table line for line
from left to right. Other combinations,
e.g. reading the table diagonally, are not
permitted.
!
Warning!
To reduce the risk of injury from thrown
objects and blade contact, never
operate your unit without the proper
deflector for the cutting attachment
being used. To reduce the risk of injury
from loss of control
and / or contact with the cutting tool,
make sure your unit is equipped with a
proper handle and harness for the type
of cutting attachment being used.
!
Warning!
STIHL brushcutters with a loop handle
without barrier bar may be used only
with the above mentioned mowing head
with nylon line or plastic blades. Other
plastic or metal cutting tools except any
circular saw blades may only be used on
brushcutters with a bike handle or loop
handle with barrier bar in order to reduce
the risk of personal injury through
contact with the cutting tool. To reduce
the risk of serious injury to the operator
or bystanders by kickout, never use a
circular saw blade on a brushcutter with
a loop handle. Circular saw blades may
only be used on brushcutters with a
bike-handle.
FS 80, FS 80 R, FS 85, FS 85 R