Throttle Cable Adjustment - Stihl FS 80 Notice D'emploi

: Place the clamp (5) on the handle
support.
: Insert screws (6) through the holes
and screw them into the clamp (7)
as far as stop.
: Line up the handlebar.
: Tighten down the screws firmly.
FS 80, FS 80 R, FS 85, FS 85 R
10
9
7
8
Mounting the Control Handle
: Release the screw (7) and remove
it. The nut (8) remains in the control
handle (9).
: Push the control handle – throttle
trigger (10) must point toward the
gearbox – onto the handlebar (1) so
that the holes (11) line up.
: Fit screw and tighten down firmly.
11
1
11
Fitting the Throttle Cable
Do not kink the throttle cable – make
sure the throttle trigger moves freely.
: Press the throttle cable (12) into the
retainers (13).

Throttle Cable Adjustment

On control handles with slide:
: Go to chapter "Adjusting the
Throttle Cable".
English
12
13
13
12
13
21