Summary Of The Conditions Of The Transmission Of The Uplink Frames - ADEUNIS sigfox Pulse 868 Guide Utilisateur

sigfox Pulse - Guide utilisateur / User guide version V2.0.0
0x48 0xA3
0 1
Code Status
0x48 Cf Status
0x48 0xA3
0 1
Code Status
0x48 Cf Status
0x48 0xA3
0 1
Code Status
0x48 Cf Status
0x48 0xA3
0 1
Code Status
0x48 Cf Status
0x48 0xA3
4.1.10

Summary of the conditions of the transmission of the uplink frames

The table below summarizes the conditions of the transmission of the different uplink frames:
Code Description
0x10 Frames of information on the
product configuration
0x20 Frames of information on the
network configuration
0x30 Keep Alive frame
0x31 Reply frame to a register value
request in a downlink frame
0x46 Data Frame
0x47 Alarm frame
0x48 (x4) Periodic frame with 1 hour-history
0x48 Periodic frame with 24 hours-
(x13) history
8 0x074A
2 3 to 4
Frame index Delta A16
9 0x0100
2 3 to 4
Frame index Delta A18
10 0x00A5
2 3 to 4
Frame index Delta A20
11 0x00C3
2 3 to 4
PAYLOAD
Frame index Delta A22
12 0x0012
• Product start-up
• Exit from the configuration mode (AT Command)
• Reception of a downlink frame 0x01
• Periodically if the inputs are deactivated (period defined by register S301)
• Product start-up
• Exit from the configuration mode (AT Command)
• Reception of a downlink frame 0x02
24 hours elapse since the start-up of the product or since the last transmission of this frame
(5 minutes in TEST mode)
• Reception of a downlink frame 0x40
• Start-up of the product (RUN mode).
• Exit from the configuration mode (AT commande)
• Transmission period reached (period defined by register S301)
Exceeded flow threshold on one of the two channels (sending only if the exceeded flow
control is enabled by writing a non-zero value in the S326 or S327 registers).
1 hour elapses since the start-up of the product or since the last transmission of this frame
This frame is sent only if the history feature is activated in register S321.
24 hours elapse since the start-up of the product or since the last transmission of this frame
This frame is sent only if the history feature is activated in register S321.
0x003B 0x0010
5 to 6 7 to 8
PAYLOAD
Delta B16 Delta A17
0x000F 0x0000
5 to 6 7 to 8
PAYLOAD
Delta B18 Delta A19
0x0000 0x0005
5 to 6 7 to 8
PAYLOAD
Delta B20 Delta A21
0x00F1 0x0005
5 to 6
Delta B22
0x0020
Sending conditions
0x0021
9 to 10
Delta B17
0x00F1
FR
9 to 10
Delta B19
0x00B5
EN
9 to 10
Delta B21
0x00B5
Page 85 of 100