Listening To The Radio; Receiving Dab - Sony DSX-A300DAB Mode D'emploi

Listening to the Radio

To listen to the radio, press SRC to select [TUNER].
When the DAB band is selected for the first time
after replacing the car battery or changing the
connections, the initial scan starts automatically.
Allow the initial scan to finish. (If interrupted, the
initial scan will start again the next time you select
the DAB band.) If no DAB station is stored by the
initial scan, perform an auto scan (page 8).
Tip
Set [SET ANT-PWR] to [ON] (default) or [OFF] depending
on the type of DAB antenna (aerial) (page 12).

Receiving DAB

DAB (Digital Audio Broadcasting) is a transmission
system on terrestrial networks. DAB stations bundle
radio programs ("services") into an ensemble, and
each service contains one or more components.
The same service can sometimes be received on
different frequencies.
Searching for a service manually
1
Press MODE to select [DB1], [DB2] or
[DB3].
2
Press SEEK +/– to search within an
ensemble for a service; press and hold
SEEK +/– to search for different
ensembles.
Scanning stops when the unit receives a
service/ensemble. Search until the desired
service is received.
Storing a service manually
1
While receiving the service that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving stored services
1
After selecting the desired band, press a
number button (1 to 6).
Searching for a service by name (Quick-
BrowZer™)
You can display a list of services for easy searching.
1
During DAB reception, press
The unit enters Quick-BrowZer mode, and the
list of services appears.
2
Rotate the control dial to select the
desired service, then press it.
Reception starts.
To exit the Quick-BrowZer mode
Press (back).
Setting DAB announcements
Specific types of DAB announcements that you set
can interrupt the currently selected source.
1
During DAB reception, press MENU,
rotate the control dial to select [SET
GENERAL], then press it.
2
Rotate the control dial to select [SET
ANNOUNCE], then press it.
3
Rotate the control dial to select [SET
ANNC-ON] or [SET ANNC-OFF], then press
it.
Note
During a DAB announcement, the volume is adjusted to
the level set for TA in RDS (page 9).
(browse).
7
GB