Sony DSX-A300DAB Mode D'emploi page 18

NO AF: No alternative frequencies.
 Press SEEK +/– while the program service name is
flashing. The unit starts searching for another
frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO DATA
 There is no DAB service for the selected program
type.
 Press
(back).
NO INFO (no information)
 There is no label information for the current DAB
service.
NO SERV (no service)
The DAB signal cannot be received.
 Perform an auto scan (page 8).
 Check the connection of the DAB antenna
(aerial).
 Check that [ANT-PWR] is set to [ON] (page 12).
NO TP: No traffic programs.
 The unit will continue searching for available TP
stations.
OVERLOAD: The USB device is overloaded.
 Disconnect the USB device, then press SRC to
select another source.
 The USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
 Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
RECEIVING
 The DAB band is selected and the unit is waiting
to receive a service.
USB ERROR: The USB device cannot be played.
 Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
 Make sure the USB device or USB cable is securely
connected.
18
GB
USB NO MUSIC: There is no playable file.
 Connect a USB device containing playable files
(page 15).
USB NO SUPRT: The USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site on the back cover.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.