Display/Control Panel; Operation - Unold 86525 Notice D'utilisation

DISPLAY/CONTROL PANEL

Control panel:
a Button - High/Low (heating capacity)
b Button - Temperature/Time
c Button - Oscillation/Swing function
d Button - Adjustment
e ON/OFF button
f Button + Temperature/Time
Display:
g Indicator lamp - low heating capacity
h Indicator lamp - high heating capa-
city
i Hour display/temperature display
j Indicator lamp - oscillation/swing
function
k Function indicator lamp - ON/OFF

OPERATION

1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
3. Plug the mains plug of the appliance into an electrical outlet (220–240 V ~
50 Hz).
4. Place the main switch on the rear of the appliance on "I"
5. The appliance is now in standby mode, only the ON/OFF button
active.
6. Press the ON/OFF button. A short signal tone will sound.
7. Caution: The following explanations apply for adjustment on the control
panel itself, and via the remote control unit. The button designation is iden-
tical in each case.
26
Copyright UNOLD AG | www.unold.de
f
e
g
k
a
b
c
d
h
i
j
is