Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Only an authorized service center can repair the machines (e.g. a power cord substitution) using original spare partsThe
out-of-use machines must be disabled. Disconnect the plug from the electrical network and cut the cable.
Warning! Any assistance work on machines loaded with R290 refrigerant must be performed by
knowledgeable and experienced person on the R290 gas management procedures. The activities must be
carried out by personnel designated by the manufacturer or the distributor who made the sale of the
product
To replace the lamp in the lid, follow the procedure:
1. Turn off the machine;
2. Remove the complete lid from the transparent tank using the supplied key;
3. Separate the lid from the transparent sub-lid by removing the screws (detail 117 of the exploded view page 62);
4. Replace the LEDs (detail 115 of the exploded view on page 62) with new LEDs supplied by the manufacturer;
5. Assemble the lid with the transparent sub-lid;
6. Place the complete lid back onto the clear bowl.
Technical assistance
Lighting replacement
- 27 -
Publicité
Table des Matières
